APT & VS-TC Series
  • Machine Vision Lenses
  • Telecentric

APT & VS-TC Series

Product Specs

  • 1/4"
  • 1/3"
  • 1/2"
  • 1/1.8"
  • 2/3"
  • 1"
  • 1.1"
  • 4/3"
  • φ21
  • φ28.6
  • φ32
  • φ35
  • φ45
  • φ62
  • φ73
  • φ83
  • φ90

Standard Telecentric Lenses

  • While being compact in size and light in weight the VS-TC & APT series are our largest collection of telecentric lenses with WDs ranging from 40- 340mm. They produce a clear distortionless, high contrast image.
  • 1/2" - 2/3" sensor support
  • 70 models available
  • Compact
  • Light weight
  • Telecentric design
  • C-Mount
test

Telecentric Lens

Telecentric lens has parallel chief ray with its optical axis and is ideal for co-axial lighting. Telecentric lenses eliminate perspective errors in your image and do not change magnification when the WD changed. This allows accurate measurement of 3D objects or even objects that move up and down.



Telecentric Lens LINE UP

Lately there have been great changes in the image sensor market and of which one has been for a ever larger sensor size and smaller pixel size. Consequently, a sensor of the same size but with a greater pixel number could yield a picture with a much higher resolution.

The advantage of a reduced pixel size could dramatically increase the number of pixels that could fit into a sensor of the same size. However, a reduced pixel size translates into a reduced surface area for light signals. In this case, the ability of a lens to collect as completely as possible the light signals from the sources and therefore give a higher resolution is readily pursued.

On the other hand, when the pixel size remains the same but the total sensor size is increased to include a much greater pixel number for high resolution purposes, a larger sensor size is needed for a larger image circle.

It is a daunting task to reconcile between pixel size and sensor size with respect to lens light throughput optimization, and is often easily said than done. Nevertheless, VST has successfully elevated the industry benchmark by adding many new models to the lineup for high mega-pixel telecentric lenses in a relatively short period of time.



APT series

ModelMag.WD(mm)Working F/#Coaxial LightingMax SensorDownloadRequestSelect
APT08-650.8x66.09.6-1/1.8"LoginQuote/Demo
APT08-65C0.8x66.09.61/1.8"LoginQuote/Demo
APT1-651x65.912.1- 1/1.8"LoginQuote/Demo
APT1-65C1x65.912.11/1.8"LoginQuote/Demo
APT1.5-651.5x68.925- 1/1.8"LoginQuote/Demo
APT1.5-65C1.5x68.9251/1.8"LoginQuote/Demo
APT2-652x65.425- 1/1.8"LoginQuote/Demo
APT2-65C2x65.4251/1.8"LoginQuote/Demo
APT4-654x64.528.9-2/3"LoginQuote/Demo
APT4-65C4x64.528.92/3"LoginQuote/Demo
APT08-1200.8x121.917.5-1/2"LoginQuote/Demo
APT08-120C0.8x121.917.51/2"LoginQuote/Demo
APT1-1101x113.021.9-1/1.8"LoginQuote/Demo
APT1-110C1x113.021.91/1.8"LoginQuote/Demo
APT1.5-1101.5x115.018.7-1/1.8"LoginQuote/Demo
APT1.5-110C1.5x115.018.71/1.8"LoginQuote/Demo
APT2-1102x110.024.9-1/1.8"LoginQuote/Demo
APT2-110C2x110.024.91/1.8"LoginQuote/Demo

VS-TC series

ModelMag.WD(mm)Working F/#NACo-axial LightingSensor size(max.)DownloadRequestSelect
VS-TC1.5-401.5x39.311.20.067-1/2"LoginQuote/Demo
VS-TC2-402.0x39.515.00.067-1/2"LoginQuote/Demo
VS-TC3-40-LD3.0x37.223.50.064-1/2"LoginQuote/Demo
VS-TC4-404.0x39.629.40.068-1/2"LoginQuote/Demo
VS-TC1.5-40CO1.5x39.311.20.0671/2"LoginQuote/Demo
VS-TC2-40CO2.0x39.515.00.0671/2"LoginQuote/Demo
VS-TC3-40CO-LD3.0x37.223.50.0641/2"LoginQuote/Demo
VS-TC4-40CO4.0x 39.629.40.0681/2"LoginQuote/Demo
VS-TC08-650.8x65.410.00.040-1/2"LoginQuote/Demo
VS-TC1-65-161.0x65.914.20.035-1/2"LoginQuote/Demo
VS-TC1.5-701.5x69.515.60.048-2/3"LoginQuote/Demo
VS-TC2-652.0x66.715.60.064-2/3"LoginQuote/Demo
VS-TC3-653.0x65.322.00.068-2/3"LoginQuote/Demo
VS-TC4-654.0x64.529.10.069-2/3"LoginQuote/Demo
VS-TC5-655.0x64.536.20.069-2/3"LoginQuote/Demo
VS-TC6-656.0x64.343.10.070-2/3"LoginQuote/Demo
VS-TC8-658.0x6457.1 0.070-2/3"LoginQuote/Demo
VS-TC10-6510x64.873.20.068-2/3"LoginQuote/Demo
VS-TC08-65CO0.8x65.410.00.0401/2"LoginQuote/Demo
VS-TC1-65CO-161.0x65.914.20.0351/2"LoginQuote/Demo
VS-TC1.5-70CO1.5x69.515.60.0482/3"LoginQuote/Demo
VS-TC2-65CO2.0x66.715.60.0642/3"LoginQuote/Demo
VS-TC3-65CO3.0x65.322.00.0682/3"LoginQuote/Demo
VS-TC4-65CO4.0x64.529.10.0692/3"LoginQuote/Demo
VS-TC5-65CO5.0x64.536.20.0692/3"LoginQuote/Demo
VS-TC6-65CO6.0x64.343.10.0702/3"LoginQuote/Demo
VS-TC8-65CO8.0x6457.1 0.0702/3"LoginQuote/Demo
VS-TC10-65CO10x64.873.20.0682/3"LoginQuote/Demo
VS-TC08-1200.8x122.518.00.022-1/2"LoginQuote/Demo
VS-TC1-1101.0x113.020.00.025-1/2"LoginQuote/Demo
VS-TC1.5N-1101.5x112.018.80.040-1/2"LoginQuote/Demo
VS-TC2-110-LD2.0x110.024.90.040-1/2"LoginQuote/Demo
VS-TC3-1103.0x107.337.50.040-2/3"LoginQuote/Demo
VS-TC4-110-LD4.0x11041.70.048-2/3"LoginQuote/Demo
VS-TC5-1105.0x109.551.80.048-1/2"LoginQuote/Demo
VS-TC6-110-LD6.0x112.467.30.045-2/3"LoginQuote/Demo
VS-TC8-110-LD8.0x112.089.30.045-2/3"LoginQuote/Demo
VS-TC08-120CO0.8x122.518.00.022-1/2"LoginQuote/Demo
VS-TC1-110CO1.0x113.020.00.0251/2"LoginQuote/Demo
VS-TC1.5N-110CO1.5x112.018.80.0401/2"LoginQuote/Demo
VS-TC2-110CO-LD2.0x110.024.90.0401/2"LoginQuote/Demo
VS-TC3-110CO3.0x107.337.50.0402/3"LoginQuote/Demo
VS-TC4-110CO-LD4.0x11041.70.0482/3"LoginQuote/Demo
VS-TC5-110CO5.0x109.551.80.0481/2"LoginQuote/Demo
VS-TC6-110CO-LD6.0x112.467.30.0452/3"LoginQuote/Demo
VS-TC8-110CO-LD8.0x112.089.30.0452/3"LoginQuote/Demo
VS-TC05-1500.5x152.212.50.020-1/2"LoginQuote/Demo
VS-TC08-1700.8x174.813.910.029-1/2"LoginQuote/Demo
VS-TC1-1501.0x156.212.980.038-1/2"LoginQuote/Demo
VS-TC05-150CO0.5x152.212.50.0201/2"LoginQuote/Demo
VS-TC08-170CO0.8x174.813.90.0291/2"LoginQuote/Demo
VS-TC1-150CO1.0x156.213.00.0381/2"LoginQuote/Demo
VS-TC08-220CO0.8x232.68.00.0501/2"LoginQuote/Demo
VS-TC1-220CO1.0x220.010.00.0501/2"LoginQuote/Demo
VS-TC2-220-162.0x220.043.50.023-1/2"LoginQuote/Demo
VS-TC2-220CO-162.0x220.043.50.0231/2"LoginQuote/Demo
VS-TC07-340CO0.7x34010.90.0321/2"LoginQuote/Demo
VS-TC1-300CO1.0x307.315.60.0321/2"LoginQuote/Demo

※You can make a quote/demo request up to 5 items at once listed on the same page.
Please click “Select” checkbox for the applicable items.
(Request for multiple items cannot be made from a different page)