Notice.
VL-A01W-1 can't use with VLP series (power supply) or VLC series (controller)
because it require trigger input to one of M12 connector pin to turn on the right. However, this design is quite useful for smart camera since it's available to connect directly and the light will be operated by trigger signal from the camera if pin assignment is suitable for our design. Additionally, this lighting will switch operation mode from strobe to continuous automatically depends on trigger signal. Strobe mode will occur when trigger is less than 5mS, If trigger is longer than 5mS the light will be continuous mode with lower brightness.
Accessories
Optional M12 connector cable.
SPECIFICATIONS
| Model No. | Color | Lighting Area (mm) | Input Voltage | Input Current | Intensity Control | Connector | Download , Request quotes/demos |
|---|---|---|---|---|---|---|---|
| VL-A01W-1 | White | 50 x 70 | DC 24V | Max. 0.5A (Strobe Mode) | Analog 0-10V | M12 (5Pin) Male Connector | Login |
| VL-A01W-E1 | Login |
견적/ 데모기 의뢰
저희 에 관심을 가져주셔서 대단히 감사드립니다.
견적과 데모를 원하시는 제품정보를 기입해주시면, 영업 담당자가 연락드리도록 하겠습니다.